what's going on guys Billy here and welcome to my complete guide on how to create epic hype lapses with your drone from start to finish a big thanks to Squarespace for sponsoring this video but we'll hear more from them later so one of my absolute favorite things to do with my drone right now is capture hyperlapses it's been a built-in feature in dji's drones ever since the mavic 2 Pro and it's come shipped in every drone that they've released that has Obstacle of wooden sensors built in for those of you that might be unfamiliar a
hyperlapse is basically a moving time lapse that captures photos over a specified duration at a very slow speed once you take these photos and combine them into a video the Drone in this case will look like it's flying at a normal speed but all the motion in the video will be moving really fast so it exaggerates the movement in the frame giving you a really awesome effect I admittedly haven't posted many hyperlapses here to my channel as they're usually shorter videos so they live over on my Twitter and Instagram if you follow me on either
of those platforms my username is at Billy Kyle you probably saw last year that anywhere I traveled to I found somewhere to capture one of these hyperlapses and it worked out great because I had the Raw photos to save as a still image and this moving video the hyperlapse the share as a real or post on Twitter these here are just some of the examples that I've captured so that you guys can get an understanding of what we're striving to create here with this tutorial while some might think that creating one of these hyperlapses is
super easy because it's an automated flight feature and the Drone does all the flying for you you've got to think again because there is so much work that goes into making a hyperlapse look like one of the ones that I just shared with you there's a lot of time actually planning the mission you've got to let the Drone fly the mission you've got to manage all the files post process edit the photos edit the video there's so much that goes into making just one hyperlapse it can take hours just to get that final result but
I think it's worth it because that end result it looks awesome and in this video as I mentioned we're going to go through start to finish how to create one of these hyperlapses so you guys better get ready because this is going to be one long tutorial so this here is the workflow from start to finish we first will go through a planning stage then we'll set up our mission then we'll fly the Drone I'll touch on some best practice practices for file management then we'll edit the photos then we'll turn those photos into our
final video product the hyperlapse so when it comes to the planning stage the first thing that we need to think about is our subject right where are we going to fly to capture our hyperlapse we need to make sure that where we're going has a lot of room so we can freely fly our drone over a long distance and that there's a lot of motion in that frame right so things I look for is like a busy highway a busy Interstate maybe a busy Waterway where a lot of boats are frequently coming through say a
Channel or a bay maybe you want to look for clouds rolling over a city skyline really there's so many areas where there's a lot of motion you just need to make sure that you can make your hyperlapse unique you need to make sure that it can stand out and the best way to do that is to get a ton of motion and cram it into the frame to really exaggerate that movement for example I was able to capture this shipping Port just south of New York City on an active day that made for some of
my favorite hyperlapses that I've created there's just so much going on here from the crates being moved to the forklifts moving around to larger machines operating throughout these are the unique upper opportunities that can really make for the best results but don't get me wrong I still love capturing a good City skyline with traffic whizzing by on the highway so subject matter is really important because you could take your drone out and try to capture hyperlapse of an empty field on a nice sunny day with no clouds and you'd just be better off capturing a
video because there's no motion to be exaggerated within the hyperlap so you want to make sure that your subject is right for a hyperlapse and you want to make sure that you can find as much motion as possible I don't know how many times that I could say that to me is the most important thing okay now moving on from here before we actually get into setting up our mission and actually flying the Drone for our hyperlapse to actually capture the photos we need to make sure that we set a couple of our settings correctly
for the best results there really is only one thing in particular that I want to point out and that is the saving of the raw photographs so under original you want to make sure that this is set to Raw you can also set your output to be in 4k so that you have the highest resolution preview this is the hyperlapse that the software automatically creates for you but we aren't going to be using that because we'll get the best results by making our own with those raw photographs so that pretty much concludes our planning section
find your subject make sure your settings are set properly and you'll be good to go okay now it's time to move into the actual Mission planning process so we're going to cover the four different flight modes that DJI offers within the fly and the go application and those are free Circle course lock and waypoints so to enter the hyperlapse flight mode we'll select the shooting mode icon just above the shutter and record button from here we will select hyperlapse which allows us to choose between the four different hyperlapse flight modes to dive deeper into each
of them free allows you to freely fly the Drone As You Wish while the camera captures pictures from the initial drop down menu you can choose your shooting interval so this is how often the Drone takes a photo you can choose the duration of the final hyperlapse up to 30 seconds so this is how many total photos you'll end up with and you can change the speed so the Drone won't fly super fast you typically want to be flying slower to capture a better hyperlapse so within free you have the ability to change the altitude
the position the rotation you basically have have full control over the entire drone but the controls are just dampened to that Max Speed that you have set now I usually don't use the free hyperlapse shooting mode just because I feel like it's tedious I mean you could be having your drone fly for upwards of 20 maybe even 30 minutes so could you imagine having to Pilot the Drone for 30 minutes straight at a slow speed I just feel like that would be maddening I do think that it's crucial that free is included here as an
option for those that want to make use of kind of like a more precise version of flying and capturing your hyperlapse you could also use it to actually capture like still time lapses so you could do a free hyperlapse and just let the Drone sit there for a standstill time lapse so it is good for a couple things but again it's just a hyperlapse feature that I really don't use the next hyperlapse flight mode is circle which automatically flies in a point of Interest style orbit around an object that you select to begin you'll want
to use your finger to drag a box over the subject that you want to orbit this will highlight a green box around that subject from the drop down menu you can set the shooting interval so again this is how often the Drone takes a picture you can choose the duration of the final hyperlapse so this is how many total photos you'll end up with you can set the speed that you want the Drone to fly on its autonomous point of Interest Mission and finally you can choose if you want your drone to fly in a
clockwise or counterclockwise Direction around the subject that you've selected once you have your settings set and you press go the Drone will briefly move in the direction that you have set to calibrate the drone's understanding of the subject that you've selected after doing this for a few seconds it'll begin its shooting process so circle is a great option to use when capturing a hyperlapse but personally I feel like it's a little bit one-dimensional like the Drone is just kind of orbiting around your subject it'd be so much more Dynamic if you could change the altitude
or change the gimbal pitch I just feel like you could add so much more movement to that frame to give you an example of what I'm talking about here is a circle hyperlapse which looks great in this scenario I had a lot of cloud movement which was the real subject that I was trying to capture despite the awesome mountains here in Sedona but if we look at this different hyperlapse using the waypoints flight mode I was able to to further customize my drone's Movement by increasing my altitude and pitching the camera down along my flight
path this in my opinion made for a much more Dynamic result around the skyline of Dallas I'll touch more on this as we get to the waypoints flight mode here in just a few minutes really quickly though before we move on just as a pro tip I'd recommend setting your subject area to be much larger than you think you need I found that I get a far better final product that is more smooth and stays more accurately set on what it is that you're trying to trace for example when orbiting the skyline of Philadelphia here
I wouldn't select just the Comcast Tower in the center even though that is my main subject I'd instead select the entire Skyline to ensure that the camera stays focused on what it is that I want to capture now the next flight mode that we have is one that I use very frequently it's called course lock and it does exactly what you think it would it flies along a straight path and captures photos to create your hyperlapse you can then rotate your drone in the direction that you wanted to face and change your gimbal pitch to
further customize your flight now the first step to setting up this flight mode is to point your camera and direct section that you want it to fly and then press on the lock button you can check your course on the map to make sure it's going in the direction that you want it to fly from that drop down menu like the other flight modes you can choose your shooting interval so this is how often the Drone takes a picture you can choose the duration of the final hyperlapse up to 30 seconds so this is how
many total photos you'll end up with and you can set the speed that the Drone will fly at along this course from here after pressing start the Drone will start flying along the course in that direction you're facing so you could be looking left right you could be flying backwards you could have the gimbal pitch downwards or even upwards and no matter what the Drone will fly along that course as a pro tip within course lock you can also lock onto a subject this will allow the Drone to rotate to keep said subject in frame
while flying along your course this combines the same style of flying from the circle hyperlapse light mode and can make for some more unique hyperlapses so I make use of course lock way more than I do the circle hyperlapse flight mode but still I feel like it's a little bit too one-dimensional like the Drone is just flying straight and that's it it's nice that you can select the subject and then kind of add a little bit of rotation in there but again it just flies along that straight line and does nothing else this next flight
mode here though waypoints is pretty much what I've been using to make most of my recent hyperlapses just to give you an example of the dynamic flight that I'm able to achieve these are some of the different hyperlapses that I've captured where the Drone is moving in a lot of different directions at once the Drone is changing Heights it's pitching the camera and some of the hyperlapses I've made the Drone rotate too there's just a lot going on that makes it far more engaging most of these hyperlapses also involve setting up only two waypoints which
is really easy and super fast to do so once you jump into the Waypoint hyperlapse the first order of business is to set up our waypoints my workflow is basically to figure out where I want my hyperlapse to start and where I want it to end so I'll add the starting point by pressing the plus icon on the first frame here and then I'll zip over to my end point and press on the second plus icon in my film strip so these waypoints are added based on where my drone is hovering and where my camera
is looking in real time now if I wanted to get a little more creative and say dip down towards the art museum I could add more waypoints to do so and further customize this flight but as you may have noticed from my example hyperlapses I really enjoyed letting the movement in the frame do all the work for me my goal is to set up a simple flight path that shows off that motion now after setting up my two waypoints I'll fly as close as I can back to the starting Waypoint so the Drone doesn't have
to do it for me if I were to just say press start it would fly really slow back to that star Point thus draining more battery and giving me less time for my actual hyperlapse this is the one bad part about using waypoints is that it takes a little bit longer to set up you've got to actually manually fly to each individual spot instead of hovering in one place selecting your subject and then going so you will drain more battery actually setting up your mission therefore giving you less battery to actually capture your mission so
you just need to be efficient with your timing make sure you get your waypoints set fly back to that first Waypoint and then get going as soon as possible use sport mode if you can because you're going to be able to get from point to point a lot faster and therefore you can use more battery to actually capture your hyperlapse now once we've made it it close to our first Waypoint we can begin tweaking our flight plan this means that we can change the Waypoint order so do we want the Drone to start at the
first Waypoint and progress through or do we want to fly backwards from that last Waypoint set to the first Waypoint set we can also choose our interval so as I've mentioned this is how often the Drone will take a picture on its flight and you can also decide the length of your hyperlapse or another way to look at it is how many total photos that you're left with the one thing you may have noticed is that there's no way to change the speed of the Drone because it's actually determined by the other parameters so for
example if you're going to fly a waypoint hyperlapse Mission between two waypoints and that distance is 2 000 feet a 10 second long hyperlapse is going to make the Drone fly loud faster than if over that same distance you're going to create a 30 second hyperlapse so the Drone has to fly slower to take more pictures to then accommodate a longer hyperlap so hopefully that makes sense but basically your speed is determined based off of the parameters that you set your interval as well as the distance once you have everything said all that's left to
do is start your flight and the Drone will make its way to the first way Waypoint and go on from there again this flight mode is so Dynamic I love all the different options that I have and the different moves that I can make the Drone do like I don't even have to fly horizontally and this hyperlapse here for example I just had the Drone fly directly upwards and Pitch the camera downwards to compensate for that movement to make one of if not probably my favorite hyperlapse now to back pedal really quickly and go back
to the planning section the final thing I want to make mention of is the task Library so with the waypoints you can save your mission to be replicated in the future so this will save everything from your drone's position to the camera pitch to the interval and the length of your hyperlapse but just as a fair warning each of these waypoints will not save the precise height of your drone at each Waypoint it's the most bizarre thing it's a very annoying bug I'm not sure if DJI is ever going to fix it but I want
to make sure I throw it in here so that you're aware of it for example let's say you set up a hyperlapse one-way point is at 200 feet and you fly to the next Waypoint and it's at 300 feet the Drone can sometimes flat to that first waypoint at 250 which means it'll go to the next waypoint at 350 so it's 50 feet off across the entire Mission which to me is unacceptable it's completely unreliable so I never fall back on using the task Library I always make sure that I fly the Drone where I
fly the mission within that same flight that I actually set those waypoints on waypoints though again has become one of my favorite flight modes to use for capturing hyperlapses because you can achieve all the same movements as the other flight modes except with more customization and precision now before we move any further a quick word from this video's sponsor Squarespace Squarespace is a platform that I've personally been using before I even started posting videos to my YouTube channel here six years ago I first built my portfolio using squarespace's platform because of their templates that are
stylish functional and easy to customize I didn't need any previous experience and I didn't need to spend an exorbitant amount of money to hire someone to build it from scratch instead I could work at my own pace choose my best photographs I wanted to add and customize my template to be exactly how I wanted it in my case I have a simple design with a black background and minimal text to keep the focus on the images Squarespace goes even deeper with detailed Analytics so I can see who's looking at my website they've got integrated SEO
tools so that I can get my work seen by more people online and if I choose to do so I can start an online store right within squarespace's platform to sell prints presets or anything else photography related so a special thanks to Squarespace for sponsoring this video and helping me display my work online for over half a decade okay so now that our mission is set up it's time to go over a few tips and best practices to follow during the actual flight of the Drone because the flight is usually automated I figured this would
be a good time to share some tips and tricks from a shooting and flying standpoint to get the best hyperlapse possible so something that is insanely important when it comes to capturing hyperlapses is composition and it's something unfortunately that you really can't teach like when it comes to photography videography and in this case hyperlapses teaching composition is nearly impossible it's something that in my opinion will just come over time as you create more as you capture more as you continue to practice right as you continue to use and fly your drone you can take your
knowledge from capturing photos and videos and pull them in to create these hyperlapses but there is a couple of things that I keep in the back of my mind when creating hyperlapses that are really important specifically to capturing like this version of a moving image so for example your subject is so important make sure that you can easily see it but your subject might be something that's not usual like again those uh the video that I did of Sedona while I had those beautiful mountains in the background that wasn't my subject the clouds were the
subject right and I wanted to make sure that you could see the clouds in most of my frame so if I was capturing a Interstate for example I'd want to make sure that the movement is seen throughout the image and not just seen in the bottom corner right showing that movement throughout the frame is so important I'm going to sound like a broken record but composition overall is so so important and it's something that really is just going to take practice and time now moving on to the topic of something a little bit more annoying
just know that if your drone comes disconnected it will immediately stop your hyperlapse and begin returning to home as you can imagine this is like so annoying because if you're in the middle of a hyperlapse and the Drone comes back to you there's no way to just pick up where you left off you've got to completely restart your hyperlapse and think about it you've wasted all that battery you've got to then come back land your drone put in a new battery put in a fresh battery take off and then restart and that kind of brings
us into our next tip which is probably pretty self-explanatory and something I don't need to mention but make sure you have fully charged batteries when you start your hyperlapse because if you want to capture 750 photos you can't do it on 7D or maybe even 80 battery you need a full 100 to capture those photos and then make it back now you might be wondering what is the best drone to capture a hyperlapse with and the answer is these two right here the mavic 3 cine and the Mini 3 Pro now remember any of the
recent drones that have come shipped after the mavic 2 Pro that have Optical wooden sensors on them will have the hyperlapse feature built in and will still give you good results but these two here are the best in my opinion because their flight time is crazy long like over 40 minutes of flight time out of one battery this is enough to fully set up a waypoint flight mode and then execute that flight all on one battery each of these drones have their own benefits as well for example the mavic 3 cine version can capture hyperlapses
at a one second interval compared to all the other drones that have a minimum of 2 seconds this allows you to capture photos faster for a different feel to your hyperlapse even though all the other mavic 3 drones have the hardware capable of doing this I think that DJI wanted to give the more expensive version and upgrade so to speak the Mini 3 Pro on the other hand has a camera that rotates vertically to capture vertical hyperlapses natively as I mentioned I share a lot of these hyperlapses through Instagram which is a platform that caters
to Vertical videos so if I can natively shoot in that aspect ratio it makes my workflow a lot more streamlined I still do a lot of vertical hyperlapses with my mavic 3 that doesn't have a camera that rotates vertically but we'll get more into that when I get into the editing portion of this video the final tip that I want to share with you is just be vigilant for any sort of erratic flight from the Drone while it's mid-flight like for example I've seen the Drone sometimes Shake around a lot just because of heavy winds
sometimes I've seen the Drone completely lose its subject and start to rotate a little bit too fast sometimes I've even seen the Drone fly faster than I programmed it to so I might say that I want the Drone to fly at 0.7 miles an hour and then it speeds up and flies at 7 miles an hour right so if you can be visual about that and make sure that you can stop it Midway you might be able to restart your hyperlapse and finish on that same battery or you can at least not waste time and
get left with a hyperlapse that you're not going to use because the Drone messed up to give you an example I have this really epic hyperlapse I captured and I got so lucky there were five total trains that passed through clouds moving traffic zipping along I-76 and don't you know that the wind completely threw the Drone around making it nearly impossible to stabilize that's just how it goes though sometimes these hyperlapses just don't turn out the way that you intended and are completely unusable that's why I like to try different angles multiple times and thoroughly
analyze the finished product right there within my remote after capturing if it's unstable or if it makes any weird movements I can simply redo it while I'm there instead of being frustrated when I get back with an unusable hyperlapse okay so now that we've planned our mission we've flown the Drone we've captured all the photos it's now time to move on to the second portion of the video which is file management and editing and think about that everything that we've already done we've driven to the location we've planned our mission we've scoped everything out we've
captured the hyperlapse we've taken all of our photos we've driven back home and we're now just at the halfway mark there's still so much more to do to get this hyperlapse looking the way we want it for our end result I told you there's going to be a lot of steps here but we're going to put on our editing hats and jump on the computer to move on through so the first step is to get our files off of the micro SD card from the Drone if you remember to capture Raw photos you should be
left with a full batch of images to pull off of your card as well as the version of the video that the Drone created for you in my case with this test hyperlapse I've got a total of 750 raw images and one video file so 751 total files the way that I like to structure my files and folders is to start with the shoot date and then add the location so in this case it'll be March 28th 2023 Dash Gettysburg I label my date with the year first then month and then day so that within
my shooting archives in my finder on my Mac the folders are all in order of the date that I was out capturing those images within this folder I'll then make a subfolder with the name of the Drone that I use so in this case it'll be the DJI mavic 3 cine from here I'll copy over all the files from the onboard SSD which in this case is a total of about 26 and a half gigabytes doing a lot of hyperlapses will definitely eat up a lot of storage especially if you're a crazy person like me
that enjoys saving every single raw file that I have ever taken ever now the next step once we've moved all of the photos over onto the hard drive of our computer or over onto like an external SSD is to edit those photos so personally I'd use Lightroom the cloud version of Lightroom you might use something different you might use Lightroom classic or any other photo editor but really the one thing you need to make sure it's able to do is batch edit photos so you can edit say one photo and then copy those settings and
paste them throughout the rest because we're going to be dealing with a lot of images here after I bring all of my photos into Lightroom and categorize my folder with the same naming scheme I use with my folder in Mac finder I edit the first photograph to my liking I adjust everything from the exposure to the white balance to the color I adjust the texture the clarity and dehaze as necessary basically I'm implementing my workflow for editing a photo as if I just captured this one single frame from here after I have the photo in
a place that I like I'll copy the edits from that photo and paste them amongst the other 749 photos within this album so all the other photos that are going to make up the hyperlapse this copy and paste process can take a little while to complete so at this stage I'll usually step away from my computer to get something else done or I'll kill some time by trying to find another task to complete while here on my computer this right here is the reason why we capture raw photographs this is the biggest piece of the
puzzle and it's the reason why we deal with a library of 26 and a half gigs of photographs just for one hyperlapse because you get so much more flexibility out of these raw photographs when you edit them better dynamic range you get better uh you know control over the white balance better control over the colors just better editing in general that's going to make your hyperlapse look that much better now once the edits have been applied to all the other photographs I quickly rip through to make sure that all the photos look good with those
settings applied sometimes cloud cover can mess things up change changing light maybe a different subject comes in a frame there's a lot of things I am specifically looking out for but really I'm just doing a high level scan to make sure that they all look good sometimes this process is lengthened by finding one little thing that I want to change and then I have to copy and paste those edits to all the photos again but that's just how it goes with photo editing I can never be satisfied for some reason now once you have all
these photos to a spot where you like the look of them will batch export the images back onto our hard drive as full sized jpegs you don't want to do any sort of resizing to mess with the resolution because we'll be cropping these down slightly when we turn them into a video so we want as much resolution to play with as possible within my main folder that is titled with the date and location I'll make a subfolder titled hyperlapse edits and store all the edited jpegs right in there this is another process that can take
some time when dealing with these large batches of photos so it's always good to just step away rather than wait for the progress bar to slowly tick along so capturing all of those raw photographs really does make a huge difference you wouldn't be able to get the same look if you captured all jpeg photographs and think about it right you you get all these still raw photographs you could pull some out and just use them as Stills and you could print them you could post them you could do anything you want to them so you're
really getting kind of The Best of Both Worlds here you're getting a bunch of still images and you also get a moving video in the form of a hyperlapse okay now moving into the video editing portion it's time to finally turn all these photos into a moving video into a hyperlapse and right off the bat I just want to say that my process my workflow moving on from here is not the best I mean I've tried different things to kind of make it a little bit more seamless I jump around to different programs I use
different softwares so just follow along with me you'll end up getting it eventually it's something that now just works in my brain I zip all around my computer and make that final hyperlapse happen as I need to but just know that this is an area that personally I'm trying to focus on fixing and making better and if you have any implementations in your workflow that you want to share definitely put them down below in the comments section I really do urge this to kind of be like a community thing so people can share their feedback
and let me know kind of what you do in this process in the video editing process for creating a hyperlapse so the first thing I do is jump into Final Cut Pro and create a new library for every single shoot I make a new library and then typically each project within that shoot will get its own event so I'll just name this event hyperlapse so we'll go ahead and drag all the edited photos into our event and create our first project to Loosely assemble our hyperlapse the project I usually title hyperlapse Dash full and the
resolution is the full size of the photograph so in this case on my mavic 3 here it'll be 5272 by 3948 now once we drag in all of those photos to the timeline the video will be insanely long so we'll select all the clips by dragging across right clicking and then selecting compound this gives us one single video clip to deal with it to make things a whole lot easier now it's time to shorten this so I'll press command R to bring up the retime controls for this clip and then I'll speed it up to
match the length that I selected in the DJI fly app so in this case here I took a full 30 second hyperlapse with 750 photos so I'll retime this to be 30 seconds if instead you did half so 375 photos then you should go with the length that you select did in the fly episode 15 seconds now when you watch this initial video back this initial compounded clip it will look insanely jumpy so we need to add stabilization to this unfortunately Final Cut Pro doesn't allow you to stabilize a compound clip so we have to
export this project and then import that compounded clip to trick the software into thinking it's an actual video file this is the reason I made the project the full resolution of the photo so that we wouldn't lose any resolution in the video when we export it now once I've imported that clip I'll create a second project called hyperlapse Dash stab one with stab standing for stabilization the resolution of this project will be the full resolution of the photo again so 5272 by 3948 on my mavic 3. the reason I put one at the end of
the name is because I know that in most cases I'll have to run multiple layers of stabilization to get a super smooth end result like with this clip when I add warp stabilizer and play with the different algorithms smooth Cam and inertia cam it takes out a lot of the initial Shake but it isn't as smooth as I'd like it to be from here I'll repeat the process again I'll export this video file re-import the stabilized clip and then add it to a second project called hyperlapse Dash tab 2. again with the full resolution of
the photo so 5272 by 3948 adding the second layer of stabilization did the trick for me to smooth out the final little bumps which means I can re-exor my video file to make our final video project this gets titled hyperlapse Dash final and because I typically shared my hyperlapses as an Instagram reel I want to export this in a 9x16 aspect ratio and I like to make it 4K so 2160 by 3840 because we've been exporting our files in the higher resolution we'll have plenty of pixels to play with here when cropping down on our
image so once I've increased the scale of my video and re-centered it to put my main subject right there in the middle all of the hard work is pretty much finished I just need to do something to make this video Loop so typically I just duplicate the clip reverse it and then from here it'll continue to bounce back and forth on Instagram okay so that is my full process from start to finish on how to create a hyperlapse from the planning to the capturing of the file management to the photo editing to the video editing
that is each and every single step that I take to create the hyperlapses that you see over on my Twitter and Instagram but I do have some bonus tips kind of like some Pro tips I guess I want to share with you so let's first start with a couple of editing tips that fall into this bonus category the first is the use of of Adobe After Effects and the stabilized motion tool that can be used if your clip just really won't get stable no matter how much warp stabilizer you use I don't need to use
this every time but it is a great way to take out any minor jumps or bumps in your video I typically just bring one of the already stabilized clips that I made from Final Cut Pro and then run that stabilized motion tool Final Cut Pro is still my final point of editing though so I'll use it to resize my horizontal video clip into a vertical video clip for uploading the social media the next editing Pro tip here is a trick that I use during sunset hyperlapses where the lighting changes remember how we'd copy and paste
our photo edits across the entire collection of photos well if your first photo was taken when the sun was up and shining and your last photo was taken in the dark after the sun has set then your edits are not going to look the same because the light is drastically different you'll have to edit each photo differently so how do you compensate for light that gradually changes I mean you could go through and edit each individual photo put that would be a huge pain and probably would honestly look pretty terrible so the trick that I've
used is to edit my first photo paste the settings throughout and then export that first batch of photos then I'll re-edit the last photo and paste those settings throughout giving me two total sets of photographs one edited for that first photo and then one edited for that last photo fast forwarding to the video editing process in my first compound clip that I named full I'll layer each set of photographs on top of each other the clip that is filled with photos edited for the first photograph will be keyframed to go from 100 opacity at the
first frame to zero percent opacity on the last frame I then flip this for the clip that is filled with photos edited for the last photo that'll be keyframed to go from zero percent opacity to 100 opacity this will give us an end result that looks perfectly natural the change in light is perfectly accounted for by merging both of these sets of photos together I've heard of some people using a plugin called LR time lapse Lightroom time lapse personally I haven't tried it I found this method to work fine for the hyperlapses that I like
to capture which is those kind of like day to night hyperlapses where it starts with the Sun up the sun sets and then all the lights in say a city skyline turn on now on the topic of keyframing the final Pro tip within the editing section that I want to share is that you should keyframing your hyperlapse especially when sharing vertically so that the subject is in the center of your frame after running all of the stabilization and with the Drone potentially drifting from your selected subject this will help you keep things centered now the
final thing I want to leave with you here this final section is just to be creative right try to find ways that you can make your hyperlapses unique one thing that I like to do to kind of get a little creative is use an ND filter on the front of my drone when flying during the day so I try to get my shutter speed to about like half a second or a full second because then with all that motion in the frame it's going to be even more exaggerated with motion blur instead of kind of
like that stop-motion look you get when you crank your shutter up so there's plenty of ways to get creative use waypoints to change your your uh you know the flight path maybe use different uh you know editing techniques there's so many ways to get creative really at the end of the day this is my workflow this is how I do things but you can take my workflow and make it your own to get your own unique style anyway thank you guys so much for watching I know that we covered a lot if you've got any
question feel free to let me know in the comments I'll try to get back to you but again I want to make this a community thing so if anybody has any other information about how to better make hyperlapses if you want to share anything please leave it down in the comments below anyway thank you guys so much for watching and as always I'll talk to you later peace foreign [Music]