hey guys I got another strip and waxing video for you now this one we did probably about a year ago it's not bad but it is scratched here and there uh due to Cheers sliding around on it this is a fellowship hall for a church I think this one's about 2500 square foot that's not not small but not large either so in this video I'm going to show you how to Breeze through these little smaller jobs like this and make things a whole lot easier this is what I use the strip of wax floors a
Spartan brand I've got the emulsifier one got the on and on I've got all my equipment lined up so you can see what all I'm using the only thing I've added different since the last video is the vacuum cleaner on the end I'm gonna show you how that works here in a minute we'll go ahead and start by landing on some floor stripper now I know it looked goofy in these boots but believe me when you start laying down this floor stripper it gets a little slippery so you're going to want some some boots or
some kind of some kind of shoes with some good grip I've applied stripper to about half of the big room you want to give it about a 10 to 15 minute dwell time I want you to notice how I'm walking forward into it and I'm overlapping my passes by about half if I was to start against that wall and try to work my way back my feet would be standing on where it's slippery and that this machine would be very hard to control [Music] [Music] now this new piece of equipment has made things so much
easier this is a Viper Brand Vacuum with a front mounted squeegee all you pretty much do is plug it in and then push it across the floor and it sucks the stripper up stripper and the water thank you [Applause] [Music] foreign normally this machine leaves the floor a little drier than this but we ran into on this floor is a floor as a little wave to it so you're going to see some some stripping stuff left behind but we're getting most of it with this machine this definitely beats a squeegee in a shop vac any
day I let her get about halfway sucking up that stripper and I went ahead and laid down some rinse water on the other half that way to kind of save a little time that way I'm not standing around doing anything and we keep things going to keep things more productive all right now here we're just doing our final mop we're just going over the floor with smoothing out any puddles uh so you just want the floor to dry even and with this floor being wavy like it was you're really going to need to find them
up like this and the way the floor dries better now let's fast forward to the end of the stripping part I always put down something at the doorway to keep you from tracking stripper all over the place now I'm going to show you what it looks like after I stripped it now you're going to see a couple of spots here where this little it looks like Wax but that's actually a sealer that was applied probably when the floor was first put down that that never all comes up so it's fine it will blend in with
the new wax also we're walking through checking for puddles I'm gonna make sure this floor is completely free of any kind of moisture because that can mess up our wax this is a method of waxing that I use to teach people who are who are just starting out learning how to wax it's a little easier than than pouring onto the mop and smoothing it out but basically you just put your wax in the mop bucket and then bring your mop out about halfway and then pretty much just use it until you feel it getting dry
and then re-wet it then repeat the process I'm gonna go ahead and apologize for the for the lighting in this building this building was is old and so the lighting in here is not very good I'm trying to get a better light right there but I mean there's only so much you can do with these lights [Music] thank you [Music] foreign and there you have it guys this is uh spent down the third coat we're gonna put down this third coat and let it drown us on thank you all for watching