[Music] the guy wire kit includes three guy wires two guy ring collars than the guy ring the lightning rod must be removed prior to installing the guy wire kit attach the two guy ring collars to the tripod mast using the two upper bolts that connect the mast extension to the mast [Music] [Applause] [Music] insert the top of each guy wire into a recess and the guy ring [Music] sled-dog I ring over the top of the mast extension and lower it until it rests on the guy ring collars hook the bottom end of each guy wire
into the corresponding leg [Music] [Applause] [Music] and pull on the loose end of the guy wire to remove any slack in the cable [Applause] tighten the clamp nuts on each guy wire to prevent the wire from slipping [Music] tighten the turnbuckles on each guy wire to the desired tension [Music] use a level on the mast to ensure the mass remains plumb as the guy wires are tightened [Music] [Applause] [Music] finish by reattaching the lightning-rod [Music] [Applause] [Music]
